Sample connection procedure for IRLP Node 9250, Western Reflector
- “Is the W6SON repeater busy? This is (your callsign)”
- Wait a few seconds to identify whether or not the repeater is busy
- “This is (your callsign) accessing IRLP Node 9250.” Use DTMF keypad to enter the number of the node you wish to connect to, in this case “9” “2” “5” “0”, release PTT, and pause 5 seconds to hear link connect message.
- Wait 15 seconds before transmitting to be sure no QSO is in progress. Then, key up and call CQ: “This is (your callsign) calling CQ on the IRLP Western Reflector.” Wait 15 seconds.
- If someone answers, proceed with QSO, pausing 5 seconds between each key up and speaking.
- If no response after 15 seconds, key up and announce: “(your callsign) is leaving the Western Reflector,” then enter DTMF Tones “7” “3” and release PTT. You should hear the message, “Western Reflector Link Clear.” Then, sign off on the W6SON repeater with your callsign.
If connecting to the WIN System, please review and abide by the WIN System’s operating guidelines.