Help Programming a Baofeng GT-3 Mark II HT

Back to: Technical Questions and Answers3 Replies
  • Author
    Posts
  • WB6FRZ
    December 7, 2015 at 5:18 PM #10525

    A friend has a dual-band Baofeng GT-3 Mark II HT and all we want to do is get it to talk with the 147.315 2m repeater.
    It works fine on simplex but it doesn’t seem to want to receive a signal from the repeater. It seems to transmit okay into and out of the repeater. Anybody have any secret sauce that we can pour over this HT?

    Thanks,

    John
    WB6FRZ

    NH7X
    December 7, 2015 at 7:25 PM #10527

    Just a thought. I don’t have a manual, but does that radio support PL decode? If so, and if it is activated, is the decode set to a different PL tone than the encode?

    KK6OVH
    December 10, 2015 at 9:57 PM #10528

    Step by step instructions:
    http://www.miklor.com/COM/UV_ProgMem.php

    WB6FRZ
    January 5, 2016 at 9:12 PM #10560

    Charlie and Darv, thanks much for the replies and the help. Charlie I don’t know much about the radio except that programming it is so non-intuitive that it hurts to try. Darv, I am forwarding the programming instructions to my friend from the link you provided. Thanks very much.

    73,

    John
    WB6FRZ

  • Author
    Posts
  • You must be logged in to reply to this topic.