Meshtastic T Echo needs Firmware update
- This topic has 2 replies, 2 voices, and was last updated 1 year, 7 months ago by
.
-
Posts
-
I purchased the T Echo after a presentation at the SCRA membership meeting this past fall. It arrived with Firmware pre installed which worked fine until recently. The firmware is no longer supported thus rendering the T Echo inoperable. Despite efforts on my part I cannot seem to update/flash update to the latest stable firmware. I’ve been trying to do this on both an iPhone 13 and an IPad. No luck! Is there anyone in the club with the expertise in accompliaccomplishing this task that I could meet up with that could assist me in this?
I’d be more than happy to buy you a nice lunch!I saw your request for help with your T-Echo and wondered what kind of help you might get. I have two T-Echos and used my PC to flash one with old firmware that I should update before what happened to you happens to me. The other one I flashed with the latest Beta firmware. Both seem to be ok for now. I have seen information that the T-Echo needs to be reset before the firmware can be updated. I need to find out if this is the procedure before updating mine. I know someone I can probably ask tomorrow night, but maybe someone on this site will know and can tell us both before then.
73s,
KN6NOT (Susie)Well I finally figured out the Firmware update problem. I could never make it work with my iPhone 13 or my iPad so I dusted off an old HP laptop, installed Chrome as my browser then followed the instructions on Meshtastic and what do you know…..the Firmware flashed to my T-Echo and it works. A little perseverance paid off!
- You must be logged in to reply to this topic.