Yaesu Fusion Issues

Home Forums Technical Questions and Answers Yaesu Fusion Issues

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10375
    kz6t
    Moderator

    When the Yaesu Fusion System is installed, there are bound to be questions that come up on how to use it. I am starting this thread to deal with questions, issues, and answers generally dealing with the Fusion system, and or the Yaesu digital radios that support it. So if you have questions, answers, tips or tricks, with the Fusion repeater, the FTM-400, DR-1, DR-2, FT991, WIRES, or any digitally related product, please post up.

    #10383
    kz6t
    Moderator

    Undocumented FTM 400 Feature – Cross Band Repeat

    Yaesu omitted this feature from the user manual but the radio actually supports it.

    Here are the steps:

    Entering Cross-band mode
    Turn the APRS modem off.
    Set a UHF frequency in either the upper or lower display, using either the VFO or memory.
    Set a VHF frequency in the other display, using either the VFO or memory.
    Turn the FTM-400 off.
    Press and hold the lower 3 buttons to the right of the display then press the power button. “X-BAND Repeater” will be displayed between the upper and lower frequency displays, if the FTM-400 transferred into cross-band repeater mode.

    Exiting Cross-band mode
    Turn the FTM-400 off.
    Press and hold the lower 3 buttons to the right of the display then press the power button. “X-BAND Repeater” will not be displayed between the upper and lower frequency displays, if the FTM-400 transferred out of cross-band repeater mode.
    Return the frequencies to your preferences.
    Turn the APRS modem on, if you run APRS.

    Attached is a file to download.

    Attachments:
    You must be logged in to view attached files.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.