Pelican cases available

Home Forums Announcements and News Pelican cases available

This topic contains 1 reply, has 1 voice, and was last updated by  N2WD 3 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #11817

    N2WD
    Participant

    Five Pelican cases are available. Pelican makes very robust waterproof cases that can be used for transporting delicate equipment. My company used them for shipping electronics for demonstration purposes. Note that some of these cases may no longer be fully watertight if the air equalization valve has been damaged.
    These cases are black and have Pick N Pluck™ foam which allows reconfiguration of the foam without tools. Some of the foam has already been “plucked” but there’s still quite a bit left.

    There’s one Pelican 1600 case available. $50
    See https://www.pelican.com/us/en/product/cases/protector/1600

    • Interior: 21.5″ × 16.5″ × 8″
    • 2 level Pick N Pluck™ with convoluted lid foam

    There are four Pelican 1650 cases available. $75 each
    See https://www.pelican.com/us/en/product/cases/protector/1650

    • Interior: 28.6″ × 17.5″ × 10.7″
    • 4 strong polyurethane wheels with stainless steel bearings
    • Watertight, crushproof, and dustproof
    • 2 level Pick N Pluck™ with convoluted lid foam
    • Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
    • Easy open Double Throw latches

    Reply to this email or call the phone number listed in the member directory if you would like to see the cases or just would like more information,
    73, Ed
    N2WD

    #11818

    N2WD
    Participant

    Those interested in the Pelican cases should call me directly at 707.953.7470.
    The phone number listed for me in the SCRA roster is not correct. Thanks to John WB6FRZ for figuring it out and finding my correct number in an old directory. Give me a call if you’re interested in a Pelican case.
    73, Ed
    N2WD

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Top