Help Programming a Baofeng GT-3 Mark II HT

Home Forums Technical Questions and Answers Help Programming a Baofeng GT-3 Mark II HT

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #10525
    WB6FRZ
    Participant

    A friend has a dual-band Baofeng GT-3 Mark II HT and all we want to do is get it to talk with the 147.315 2m repeater.
    It works fine on simplex but it doesn’t seem to want to receive a signal from the repeater. It seems to transmit okay into and out of the repeater. Anybody have any secret sauce that we can pour over this HT?

    Thanks,

    John
    WB6FRZ

    #10527
    kz6t
    Moderator

    Just a thought. I don’t have a manual, but does that radio support PL decode? If so, and if it is activated, is the decode set to a different PL tone than the encode?

    #10528
    KK6OVH
    Participant

    Step by step instructions:
    http://www.miklor.com/COM/UV_ProgMem.php

    #10560
    WB6FRZ
    Participant

    Charlie and Darv, thanks much for the replies and the help. Charlie I don’t know much about the radio except that programming it is so non-intuitive that it hurts to try. Darv, I am forwarding the programming instructions to my friend from the link you provided. Thanks very much.

    73,

    John
    WB6FRZ

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.