Donated equipment from Al Derrick KG6HS

Home Forums Sales and Swaps Donated equipment from Al Derrick KG6HS

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #12247
    AA6BD
    Moderator

    Al Derrick KG6HS has closed his shack and donated his equipment to the club with the hope that some members could make use of it. Here is a listing of what is available. If you are interested in an item, please contact Bill Dornbush at AA6BD@arrl.net

    We would usually have all this on display at the August club meeting – but not this year.

    Try out any item and if you decide to keep it, make a donation to the club. You can use EBay to get an idea of what they sell for.

    – Kenwood TS-430S 160-10M transceiver
    – Kenwood TR-7950 2M mobile transceiver
    – Kenwood TR-2500 2M HT transceiver
    – Yaesu KT-727R 2M/440 HT transceiver
    – Alinco ELH-230 2M linear amplifier
    – MFJ-900 Econo Tuner
    – Heathkit HD-1481 remote coax switch
    – SST Electronics T-2 UltraTuner
    – Quement SWB-3 SWR-power meter
    – Message Minder 1600 answering machine
    – AEA Keyer
    – The Scotia by Hamco paddle key
    – Micronta 21-525A FS/SWR tester
    – B&W Protax 375 6 position coax switch
    – HyGain Hy-seas receiver
    – Drake DL300 dummy load
    – Astatic D-104-C Microphone
    – New-tronics mobile antenna base
    – Daiwa CS-201 2 position antenna switch
    – CDE HAM-II/CD-44 transmit/receive direction control
    – 2 CDE rotors with rotor control wire
    – 2 RG213 coax about 100 feet each
    – Belden 8214 coax about 100 feet
    – Ladder line
    – RG58. RG8X coax unknown length

    #12302
    AA6BD
    Moderator

    The following are no longer available:
    Kenwood TS430S
    Kenwood TR-7950 2M mobile transceiver
    Alinco ELH-230
    Heathkit HD-1481
    MFJ-900 Econo Tuner
    Astatic D104C
    Daiwa CS-201
    Rotors
    Coax
    Ladder line
    AEA Keyer
    The Scotia by Hamco paddle key

    #12377
    KI6MSP
    Participant

    Bill….I’m interested in the following:
    2 CDE rotors with rotor control wire

    #12378
    AA6BD
    Moderator

    Darryl,
    The rotors are gone, as noted in post #2

    –Bill

    #12379
    kj6qiq
    Participant

    Darryl and Bill,

    I just finished checking over one of the 3 rotators I picked up from you and it seems to check ok for my needs. I can return the other two, one is CDE and the other is Aliance, with a CDE control box to you are pass on to Paul to check out. Let me know.
    Scott KJ6QIQ

    #12380
    AA6BD
    Moderator

    Scott, Can you arrange with Darryl to get the rotors to him?

    –Bill AA6BD

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.